We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Laser Surveying System.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Laser Surveying System - List of Manufacturers, Suppliers, Companies and Products

Laser Surveying System Product List

1～5 item / All 5 items

Displayed results
[PENTAX UAV Laser Surveying System]

[PENTAX UAV Laser Surveying System]

Measured in a pasture of about 7 hectares! A demonstration was conducted with a flight time of approximately 13 to 14 minutes.

Through our distributor, Asahikawa System Service Co., Ltd., we received a request for a demonstration of the UAV and laser surveying system 'UL-1' from Sun Technical Consultant Co., Ltd. in Abashiri City, Hokkaido. (The current model is UL-3.) Measurements were taken in a pasture of over 7 hectares near Kushiro City, Hokkaido, and the measurement was completed in approximately 13 to 14 minutes of flight time. Additionally, measurements were also conducted using a ground-based 3D laser scanner. For more details, please contact us. *For more information, please refer to the PDF document or feel free to contact us.*

  • Other measurement, recording and measuring instruments
  • Distance measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UAV Laser Surveying System UL-3

UAV Laser Surveying System UL-3

Acquire 3D data of a wide area of the surface in a short time, suitable for shortening construction periods and reducing manpower!

The UAV laser surveying system "UL-3," developed by TI Asahi, known for its PENTAX brand surveying instruments. The maximum flight time is approximately 30 minutes (during hovering). Point clouds obtained by the LiDAR sensor are colorized using three 26 MP cameras. In forested areas, the laser reaches the ground surface, allowing for the acquisition of 3D surface data through software processing. It is suitable for obtaining surface data in extensive forest areas and for measuring in hard-to-access disaster sites. The multifunctional software (LP360Drone) is intuitive and easy to process. ■ Maximum flight time: approximately 30 minutes (during hovering / with measurement unit mounted) ■ Equipped with high-rate GNSS/IMU sensors ■ Aircraft model: Matrice350 • Maximum measurement distance of the LiDAR sensor: Max. 300m at 100% reflectivity, 120m at 20% reflectivity • FOV 120° (horizontal) 40.3° (forward) • Improved vegetation capture with three echoes • Equipped with high-precision IMU • Sensor status can be monitored via WebUI • Weight of the LiDAR unit is approximately 2.23kg • Aircraft model: DJI Matrice350 • Communication range is approximately 8km

  • 3D measuring device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Efficient output of accurate 3D point clouds and photos [Vehicle-mounted photo laser measurement]

Efficient output of accurate 3D point clouds and photos [Vehicle-mounted photo laser measurement]

Equipped with GPS, optical cameras, and various measuring instruments, continuously measuring while on the move!

"Vehicle-mounted Photogrammetry Laser Measurement (MMS)" is a system that carries measurement instruments such as laser scanners, GPS, IMU, and optical cameras on a vehicle to continuously measure while in motion. By expanding the data obtained from each measurement instrument into the same coordinate space, it efficiently outputs accurate 3D point clouds and images. Calibration technology, which is used to maintain the accuracy of this composite system, is a feature of this system. 【Features】 ■ Acquires location information via GPS ■ Captures situations with a camera ■ Obtains 3D data using a laser scanner ■ Collects tilt and other data with an IMU and maintains GPS accuracy ■ Acquires 2 million points of point cloud per second *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic measuring instruments
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] UAV Laser Surveying i-construction Initial Survey

[Example] UAV Laser Surveying i-construction Initial Survey

We will introduce examples of UAV and laser surveying using PENTAX's dual-frequency GNSS receivers!

We would like to introduce a case study of i-construction site surveying from our client, Michibata Corporation in Fukui City. Michibata Corporation is actively engaged in ICT-utilized construction (i-Construction) commissioned by the Ministry of Land, Infrastructure, Transport and Tourism. They handle everything from creating 3D design data, aerial surveying using UAVs, point cloud processing, to 3D as-built management. You can find more details in the related links below, so please take a look. *For more information, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
UAV laser surveying system 'UL-3' effective for shortening construction periods and reducing manpower.

UAV laser surveying system 'UL-3' effective for shortening construction periods and reducing manpower.

Acquire 3D data of a wide area of the surface in a short time. Ideal for shortening construction time and reducing labor!

The 'UL-3', developed by TI Asahi, known for its PENTAX brand surveying equipment, is a UAV laser surveying system capable of acquiring high-precision 3D data of extensive surface areas using a LiDAR sensor and three 26 MP cameras. It can fly for up to 30 minutes, making it particularly suitable for measuring forest areas and disaster sites. The measurement range is up to 300 meters. It employs a high-rate GNSS/IMU sensor and the Matrice 350 airframe. The included LP360Drone software makes it easy to create deliverables, effectively shortening project timelines and reducing manpower. 【Features】 ■ LiDAR sensor with a point cloud density of 640,000 points/360° ■ Maximum measurement range of 300 meters, suitable for forest areas and disaster sites ■ Equipped with high-rate GNSS/IMU sensor and Matrice 350 airframe ■ Maximum flight time of 30 minutes (during hovering) with a communication range of approximately 8 km ■ The area that can be measured on a single full charge is 458m x 458m = approximately 21 hectares (about 4.5 times the size of Tokyo Dome). ■ The intuitive software "LP360" allows for the generation of deliverables and classification of point clouds. *For more details, please download the materials or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.